DIGITAL INTERFACE ELECTRONICSBusek provides custom digital interfaces for flight and terrestrial applications. These includedigital interface units to coordinate command, power, and telemetry for thruster powerprocessing units, instruments, and power management subsystems. Flight examples include:ContactBusek Co, Inc | 11 Tech Circle, Natick, MA 01760 | 508.655.5565Home | ContactDigital Control Interface Unit (DCIU) for BPU-600 (Flight Heritage, FalconSat-5)The microcontroller-based system provides an abstraction layer between the high-level spacecraft commands and the thruster’s low-level actuation and monitor operations.•Unified External Addressable Memory (64kBytes)•8 12-bit Analog Control Outputs•48 12-bit Analog Monitor Inputs•19 5V CMOS Digital Control Outputs•2 TTL Digital Monitor Inputs•Isolated Differential Asynchronous Serial Bus (RX/TX)•Isolated Differential GPS PPS Input•In-Flight Reprogramable Code EEPROM (128kBytes)Digital Control Interface Unit (DCIU) for MPACS (Flight Heritage, FalconSat-3)This rugged system provided electrical isolation, and command / control / telemetry interface between the MPACS and the flight computer. Products & ServicesDigital Control Interface Unit (DCIU) for Disturbance Reduction Unit, Space Technology 7, Lisa PathfinderThis microprocessor-based control system provides command and telemetry interface with the satellite avionics and controls the thrusters by adjusting electrode Voltages and flow rates. •32kByte ROM, 32kByte RAM•40 12-bit ADC Input Channels for PPU / Thruster monitoring•20 12-bit DAC Output Channels for PPU / Thruster command / control•RS422 IAU Communication•Regulated voltage outputs for PPUs (+5V, +/-15V)•Galvanic isolation from spacecraft chassis groundHome >> Products & Services >> Digital Interface ElectronicsHome |Download Flight Programs BrochureFalconSat-3 Press ReleaseTacSat-2 Press Release
DIGITAL INTERFACE ELECTRONICS
Busek provides custom digital interfaces for flight and terrestrial applications. These include
digital interface units to coordinate command, power, and telemetry for thruster power
Contact
Busek Co, Inc | 11 Tech Circle, Natick, MA 01760 | 508.655.5565
Home | Contact
Digital Control Interface Unit (DCIU) for BPU-600 (Flight Heritage,
FalconSat-5)
The microcontroller-based system provides an abstraction layer
between the high-level spacecraft commands and the thruster’s low-
level actuation and monitor operations.
•
Unified External Addressable Memory (64kBytes)
•
8 12-bit Analog Control Outputs
•
48 12-bit Analog Monitor Inputs
•
19 5V CMOS Digital Control Outputs
•
2 TTL Digital Monitor Inputs
•
Isolated Differential Asynchronous Serial Bus (RX/TX)
•
Isolated Differential GPS PPS Input
•
In-Flight Reprogramable Code EEPROM (128kBytes)
Digital Control Interface Unit (DCIU) for MPACS (Flight Heritage,
FalconSat-3)
This rugged system provided electrical isolation, and command /
control / telemetry interface between the MPACS and the flight
computer.
Products & Services
Digital Control Interface Unit (DCIU) for Disturbance Reduction
Unit, Space Technology 7, Lisa Pathfinder
This microprocessor-based control system provides command and
telemetry interface with the satellite avionics and controls the
thrusters by adjusting electrode Voltages and flow rates.
•
32kByte ROM, 32kByte RAM
•
40 12-bit ADC Input Channels for PPU / Thruster monitoring
•
20 12-bit DAC Output Channels for PPU / Thruster command /
control
•
RS422 IAU Communication
•
Regulated voltage outputs for PPUs (+5V, +/-15V)
•
Galvanic isolation from spacecraft chassis ground
Home >> Products & Services >> Digital Interface Electronics
Home |
Download
Flight Programs
Brochure
FalconSat-3 Press
Release
TacSat-2 Press Release
